Swift Auxi Technik Private Limited

Rotary Injection Moulding Machine Swift Auxi Technik Pvt. Ltd. has gained success in the global market by providing a large array of Rotary Injection Moulding Machines. Owing to diverse clamping systems, the machines provide an efficient operation. These are highly energy efficient and can be operated by single person, thus help to reduce the production cost as well. The machines have industrial based tensile strength and several automatic features that make their handling much easier. These have the ability to function for adequate number of years without any malfunctioning. The Rotary Injection Moulding Machines are used in the manufacturing of LED bulbs, pipe fittings, ball valves and connectors.

Additional Information:

• Item Code: SV-35-R2
• Production Capacity: 100
• Delivery Time: 15 Day
• Packaging Details: Wooden box

Rotary Type Vertical Injection Moulding Machines are designed for High accuracy and high quality moulding, Equipped with a two station rotary table, this machine can increase prodcution output and increase operational efficiency.

The main advantage of Rotary type vertical injection moulding machine is that that machine uses one and a half mould to reduce the ilde time of the machine thus increasing the production output and increasing machine effciency.

ROTARY TABLE
The 2 station rotary table uses one and half mould rotating moulds in and out of the clamping area, Station 1 is inside the clamping area wherethe moulding process takes place and the station 2 is outside the clamping area where the finished compoents are removed and new inserts are plased inside the mould cavity, thus when the machine is moulding the component at station 1 the operator at the station 2 removes the already moulded componet and prepares hte mould for next cycle by placing the inserts in the mould, as soon as the moulding at staion 1 is finished the operator can instantly start the next cycle as he as already prepared the mould at station 2 for next cycle.
Rotary type vertical injection moulding machines can increase production by up to 1.6x times, with just single operator.

CLAMPING UNIT
Equipped with 4 tie bar for stable and precise clamping control making surre that your mould closes with best accuracy and precision, eleminating any error in clamping.This machine is equipped with a ram type clampng unit to make sure that the clamping pressure is obtained accurately and is distributed over the mould in unitform manner for the best moulding results.The Ram type clamping unit also offer many additional benifits such as stable clamping pressure, zero maintennance requirements, faster clamping, better clamping control, increased mould safety.

CONTROLLER
Equipped with High end controller translates to better operation capabilities for machine and mltiple features that help track production output of machine and help you increase production by optimising settings. The controller is designed to accomodate high end features and at the same time be easy to understand and operate for indian conditions.

INJECTION UNIT
The injection unit is customised depending on your application to optimise your production requirements, we reccomned the best injection unit that satisfies all your production requirements, all the Injection units are equipped with high end heaters and multiple zone heating control for hte barrel to make sure that your material is proccesed at the perfected temeperature curve. 

EFFICIENCY
These machines are equipped with greendrive systems which include next generation hydraulic system and servo operated hydraulics instead of conventional hydraulic systems, reducing the power requirement of machine by up to 60%, added benifit of the greendrive system is that the main motor for hydraulic pump is only working when there is any movement in the machine, when the machine is idle the main motor is turned off saving electricity, also due to this nature of the greendrive system the hydraulic oil also heats up less and there less stress on the mechanical compoents thus increasing the machine service life.

SAFETY FEATURES
The machine includes multiple safety features as standard to reduce the chance of accident as much as possible, at front of the clamping area there are safety light curtains that will stop the machine instantly if anyone tries to insert anything inside the clamping area while the machine is functional, at the sides there are safety doors wich are electronically monitored to make sure that no one can open the door while the machine is operational, if someone tries to open the side safety doors then the machine will stop working and sound alarm to notifiy error.

Rotary Type Vertical Injection Moulding Machines are designed for High accuracy and high quality moulding, Equipped with a two station rotary table, this machine can increase prodcution output and increase operational efficiency.

The main advantage of Rotary type vertical injection moulding machine is that that machine uses one and a half mould to reduce the ilde time of the machine thus increasing the production output and increasing machine effciency.

ROTARY TABLE
The 2 station rotary table uses one and half mould rotating moulds in and out of the clamping area, Station 1 is inside the clamping area wherethe moulding process takes place and the station 2 is outside the clamping area where the finished compoents are removed and new inserts are plased inside the mould cavity, thus when the machine is moulding the component at station 1 the operator at the station 2 removes the already moulded componet and prepares hte mould for next cycle by placing the inserts in the mould, as soon as the moulding at staion 1 is finished the operator can instantly start the next cycle as he as already prepared the mould at station 2 for next cycle.
Rotary type vertical injection moulding machines can increase production by up to 1.6x times, with just single operator.

CLAMPING UNIT
Equipped with 4 tie bar for stable and precise clamping control making surre that your mould closes with best accuracy and precision, eleminating any error in clamping.This machine is equipped with a ram type clampng unit to make sure that the clamping pressure is obtained accurately and is distributed over the mould in unitform manner for the best moulding results.The Ram type clamping unit also offer many additional benifits such as stable clamping pressure, zero maintennance requirements, faster clamping, better clamping control, increased mould safety.

CONTROLLER
Equipped with High end controller translates to better operation capabilities for machine and mltiple features that help track production output of machine and help you increase production by optimising settings. The controller is designed to accomodate high end features and at the same time be easy to understand and operate for indian conditions.

INJECTION UNIT
The injection unit is customised depending on your application to optimise your production requirements, we reccomned the best injection unit that satisfies all your production requirements, all the Injection units are equipped with high end heaters and multiple zone heating control for hte barrel to make sure that your material is proccesed at the perfected temeperature curve. 

EFFICIENCY
These machines are equipped with greendrive systems which include next generation hydraulic system and servo operated hydraulics instead of conventional hydraulic systems, reducing the power requirement of machine by up to 60%, added benifit of the greendrive system is that the main motor for hydraulic pump is only working when there is any movement in the machine, when the machine is idle the main motor is turned off saving electricity, also due to this nature of the greendrive system the hydraulic oil also heats up less and there less stress on the mechanical compoents thus increasing the machine service life.

SAFETY FEATURES
The machine includes multiple safety features as standard to reduce the chance of accident as much as possible, at front of the clamping area there are safety light curtains that will stop the machine instantly if anyone tries to insert anything inside the clamping area while the machine is functional, at the sides there are safety doors wich are electronically monitored to make sure that no one can open the door while the machine is operational, if someone tries to open the side safety doors then the machine will stop working and sound alarm to notifiy error.

 We “Swift Auxi Technik Private Limited”, established in the year 1997, are one of the accredited organizations, engaged in manufacturing a comprehensive array of Injection Moulding Machine, Insert Moulding Machine, Water Chiller and much more. Our offered array of auxiliary equipment is manufactured using premium quality machines and other requite material, sourced from the vendors of high prestige. 

Rotary Type Vertical Injection Moulding Machines are designed for High accuracy and high quality moulding, Equipped with a two station rotary table, this machine can increase prodcution output and increase operational efficiency.

The main advantage of Rotary type vertical injection moulding machine is that that machine uses one and a half mould to reduce the ilde time of the machine thus increasing the production output and increasing machine effciency.

ROTARY TABLE
The 2 station rotary table uses one and half mould rotating moulds in and out of the clamping area, Station 1 is inside the clamping area wherethe moulding process takes place and the station 2 is outside the clamping area where the finished compoents are removed and new inserts are plased inside the mould cavity, thus when the machine is moulding the component at station 1 the operator at the station 2 removes the already moulded componet and prepares hte mould for next cycle by placing the inserts in the mould, as soon as the moulding at staion 1 is finished the operator can instantly start the next cycle as he as already prepared the mould at station 2 for next cycle.
Rotary type vertical injection moulding machines can increase production by up to 1.6x times, with just single operator.

CLAMPING UNIT
Equipped with 4 tie bar for stable and precise clamping control making surre that your mould closes with best accuracy and precision, eleminating any error in clamping.This machine is equipped with a ram type clampng unit to make sure that the clamping pressure is obtained accurately and is distributed over the mould in unitform manner for the best moulding results.The Ram type clamping unit also offer many additional benifits such as stable clamping pressure, zero maintennance requirements, faster clamping, better clamping control, increased mould safety.

CONTROLLER
Equipped with High end controller translates to better operation capabilities for machine and mltiple features that help track production output of machine and help you increase production by optimising settings. The controller is designed to accomodate high end features and at the same time be easy to understand and operate for indian conditions.

INJECTION UNIT
The injection unit is customised depending on your application to optimise your production requirements, we reccomned the best injection unit that satisfies all your production requirements, all the Injection units are equipped with high end heaters and multiple zone heating control for hte barrel to make sure that your material is proccesed at the perfected temeperature curve. 

EFFICIENCY
These machines are equipped with greendrive systems which include next generation hydraulic system and servo operated hydraulics instead of conventional hydraulic systems, reducing the power requirement of machine by up to 60%, added benifit of the greendrive system is that the main motor for hydraulic pump is only working when there is any movement in the machine, when the machine is idle the main motor is turned off saving electricity, also due to this nature of the greendrive system the hydraulic oil also heats up less and there less stress on the mechanical compoents thus increasing the machine service life.

SAFETY FEATURES
The machine includes multiple safety features as standard to reduce the chance of accident as much as possible, at front of the clamping area there are safety light curtains that will stop the machine instantly if anyone tries to insert anything inside the clamping area while the machine is functional, at the sides there are safety doors wich are electronically monitored to make sure that no one can open the door while the machine is operational, if someone tries to open the side safety doors then the machine will stop working and sound alarm to notifiy error.

• Clamping Force : 35 - 500 ton
• Injection Capacity : 0.5 - 50 oz
• Main Features :
  • Vertical clamping, vertical injection.
  • Compact design requires less floor space. Makes the take-out process more easilier.
  • Suitable for multi-purpose injection molding. Excellent for insert molding.
• Optional Feature : High-speed injection unit utilizing closed-loop system.

Additional Information:

• Item Code: SV-R-Servo
• Production Capacity: 100
• Delivery Time: 30 Day
• Packaging Details: Wooden box